Izihlangu zeSikhokelo sokuSlayida kwiiPasi zaBakhweli THY-GS-310G

IZihlangu zeSilayidi seSikhokelo sePassenger Elevators THY-GS-310G Umfanekiso okhoyo

Inkcazelo emfutshane:

Thumela i-imeyile kuthi

Iinkcukacha zeMveliso

Iithegi zeMveliso

Iiparamitha zeMveliso

Isantya esilinganiselweyo:≤1.75m/s

Tshatisa iSikhokelo sikaloliwe:10,16.4

Ulwazi lweMveliso

I-THY-GS-310G isicathulo sesikhokelo sisixhobo esikhokelayo esinokuslayida ngokuthe ngqo phakathi komzila wesikhokelo se-elevator kunye nemoto okanye i-counterweight. Iyakwazi ukuzinzisa imoto okanye i-counterweight kumzila wesikhokelo ukwenzela ukuba ikwazi ukutyibilika phezulu naphantsi ukukhusela imoto okanye i-counterweight ekubeni i-Skew okanye i-swing ngexesha lokusebenza. Ikomityi yeoli inokufakwa kwindawo ephezulu yesicathulo sesikhokelo ukunciphisa ukungqubuzana phakathi komgca wesihlangu kunye nomzila wesikhokelo. Xa izicathulo zesikhokelo zisetyenzisiwe, i-elevator enye ixhotyiswe ngamaqhekeza ayi-8, kwaye i-counterweight yemoto inamaqhekeza ama-4 nganye, kwaye ifakwe phezulu nangaphantsi kwemoto okanye i-counterweight. Isihlangu esikhokelayo siqulunqwe yintambo yezihlangu, isiseko, kunye nomzimba wezihlangu. Isihlalo sesihlangu sixhotyiswe ngeembambo ezisezantsi zokuqinisa ukuqinisekisa amandla okusebenzisa. Ngokuqhelekileyo zisebenza kwii-elevators ezinesantya se-elevator ≤ 1.75m / s. Ububanzi bomzila kaloliwe obuhambelana ne-10mm kunye ne-16mm. Isihlangu esilungisiweyo sesikhokelo sesilayidi ngokuqhelekileyo kufuneka sisetyenziswe ngekomityi yeoli kwaye sisetyenziswe kwisakhelo sobunzima.

Ufakelo lwezihlangu zesikhokelo kufuneka lufezekise ezi mfuno zilandelayo:

1. Emva kokuba izicathulo zesikhokelo eziphezulu kunye nezantsi zifakwe endaweni, kufuneka zibe kumgca othe nkqo ngaphandle kwe-skewing okanye ukuguqula. Qinisekisa ukuba izihlangu zesikhokelo eziphezulu nezisezantsi zikumgca osembindini womhlathi wokhuseleko.

2. Emva kokuba kufakwe isicathulo sesikhokelo, i-gap ekhohlo nasekunene phakathi komzila wesikhokelo kunye nomgca wesicathulo kufuneka ulingane no-0.5 ~ 2mm, kwaye i-gap phakathi kwesicathulo sezicathulo kunye nomgangatho ophezulu womzila wesikhokelo kufuneka ube ngu-0.5 ~ 2mm.